 |
Product
Comparison of Rust Bullet®
and the
Top Two Competitors in the Scientific Research Tests
| Product |
Application
Step*
|
Minimum
Recommended DFT (dry film thickness) per coat
|
Sq.
Feet covered with 1 Gal. @ Recommended DFT per coat
|
Cost
Per Gallon
|
Cost
to Cover 400 Sq. Feet with Recommended System
Thickness Per coat
|
| Rust
Bullet®
|
| Rust
Bullet |
1
|
3 Mils
|
400
|
$144.99
|
$144.99
|
| Rust
Bullet (2nd Coat) |
|
3 Mils
|
400
|
$144.99
|
$144.99
|
| Rust
Bullet requires NO
TOPCOAT unless a specific color is desired |
|
|
| Total
- (NO
ADDITIONAL PREPARATION COSTS) - ( LOW
MAINTENANCE
COSTS) |
|
$259.98
|
|
|
|
Wasser® (Avg.
used for calculation)
|
| MC
Miozinc |
1
|
3-4 Mils (3.5)
|
284.0
|
$81.00
|
$114.08
|
| MC
Ferrox B |
2
|
3-5 Mils (4.0)
|
248.5
|
$57.00
|
$91.75
|
| MC
Luster (Topcoat) |
3
|
2-3 Mils (2.5)
|
365.6
|
$90.55
|
$99.07
|
| Total
- (NOT
INCLUDING
EXTENSIVE PREPARATION COSTS**)
- (HIGH
MAINTENANCE COSTS) |
$304.90
|
|
|
| POR15®
|
| Marine
Clean™ |
1
|
|
350
|
$19.00
|
$19.00
|
| Metal
Ready™ |
2
|
|
350
|
$28.75
|
$28.75
|
| POR15
Paint |
3
|
2 Mils
|
350
|
$117.75
|
$134.57
|
| POR15
Paint (2nd Coat) |
2 Mils
|
350
|
$117.75
|
$134.57
|
| Chassis
Coat/Black Cote |
4
|
2 Mils
|
350
|
$147.00
|
$168.00
|
| Total
- (HIGH
MAINTENANCE
COSTS) |
|
|
|
$484.89
|
|
|
*
Application Step means a surface preparation, or the application
of a required component.
** Add EXTENSIVE
PREPARATION COSTS
to total cost of product depending on a variety of techniques, such
as:
SAND BLASTING AND COLLECTING, NEEDLING, HEAVY SCRAPING, AND CHEMICAL
TREATING.
In addition to the high cost of preparation, the containment and disposal
of the waste created by these extensivepreparation procedures in order
to comply with EPA (Environmental Protection Agency) requirements,could
be far greater than the initial cost of the product.
NONE OF THESE EXTENSIVE PREPARATION PROCEDURES ARE NEEDED FOR RUST BULLET,
SO THESE SUBSTANTIAL COSTS DO NOT APPLY.
RUST BULLET
- The superior rust/corrosion control product.
|
 |
