|
 |
  |
 |
 |
Company
Info
Rust Bullet, LLC
300 Brinkby Ave.
Suite 200
Reno, NV 89509
Phone:
800-245-1600
775-829-5606
775-829-5619 Fax
email
info@RustBullet.com |
 |
 |
 |
 |
|
|
|
|
PRESS
RELEASE
This is the first time the U.S. Patent
& Trademark Office (USPTO) has issued two patents on one
rust/corrosion-control product. (Read More...)
|
|
|
|
|
|
|
|
|
NACE
International:
A recently released
two-year breakthrough study estimates the annual direct cost
of corrosion in the United States to be $276 billion.
|
|
|
|
|
|
 |
 |
 |
 |
|
|
Weight per gallon: 9.0 – 9.2 lb
• Pigment type: Aluminum
• Flash Point: 123o F (Flash Point is the minimum temperature at which an open flame can ignite the product.)
• Volatile Organic Content (VOC): 286 g./liter
• Theoretical coverage: 250-450 sq. ft. per gal. Depending on surface.
• Solids by volume: 70.6%
• Recommended dry film thickness: 6-7 mils DFT (applied in 2-3 wet coats)
Avoid excessive films
• Temperature Resistance:
Continuous: 314oF
• Chemical Resistance: Excellent
• Recoatability: with Rust Bullet® after 2-72 hours. Other coatings after 24 hours
• Color: Metallic-Aluminum
• Finish: Semi-gloss
• Cure Time:
Handle:1 -2 Hours
Touch: 30-60 minutes, depending on
ambient temperature and relative
humidity
Recoat: 2-72 hours. Cure time
varies with relative humidity,
temperature and thickness of
film (24-72 hours)
• Shelf Life: 2 years provided containers remain unopened and stored between 50o-100oF.
• Tabor Abrasion: 14,000 cycles, (1000 gram load, CS-10 wheel @ 6 mils DFT)
• Intercoat Adhesion: Excellent
|
Typical Uses
High performance protection for steel and iron applications, such as industrial, marine, farm, automotive, and any place where rust is a problem.
|
|
Advantages of Rust Bullet
• Easily applied and “forgiving” under less than desirable application conditions
• High solids content provides the coverage necessary to accommodate and penetrate irregular and rusted/corroded surfaces
• Single component
• Excellent resistance to weather and mechanical abuse
• Excellent chemical resistance
• Excellent abrasion resistance
• Excellent adhesion
• Excellent UV resistance
• VOC compliant
|
|
Product Description
• Single component, moisture cure primer/finish
• High solids, VOC compliant coating
• Extremely tough, scratch and chip resistant coating
• Color: Metallic-Aluminum
|
|
Suggestions for use
Avoid ingestion, contact with skin or eyes. The use of safety glasses and chemical gloves is recommended. When brushing or rolling at elevated ambient temperatures (above 79oF) or when spraying, a self-contained breathing apparatus is recommended. See Material Safety Data Sheet before use.
|
Surface Preparation
Metal must be free of loose rust, oil, grease, wax, and moisture. This may be achieved by light scraping; a detergent or solvent wipe may be used if necessary. For more information:
RUST BULLET LLC ~ 300 Brinkby Avenue, Suite 200, Reno, NV. 800-245-1600 www.rustbullet.com ~
Information contained herein is, to our best knowledge, true and accurate, but all recommendations or suggestions are made without guarantee. Since the conditions of use are beyond our control, Rust Bullet, LLC (the Company), disclaims any liability incurred in connection with the use of our products and information contained herein. No person is authorized or empowered to make any statement or recommendation not contained herein, any such statement or recommendation so made shall not bind the Company. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use. The information is furnished upon the condition that the recipient shall make his own determination concerning suitability for his particular application.
Download Engineering Data Sheet(.PDF)
|
|
|
|
 |
 |
 |
 |
|
 |
 |
 |
 |
|
 |
| • |
A unique
one step
(two coat) process |
| • |
Simple
to apply |
| • |
Tested
scientifically
against leading rust/corrosion control products, with
before,
and after photos |
| • |
Coats
over rusty
and clean metal |
| • |
Superior
adhesion |
| • |
Little
or no surface preparation required |
| • |
Nearly
indestructible |
| • |
Strong
weather
resistance in all
climates and below sea water |
| • |
Topcoat
paint
optional |
| • |
Easy
to apply and
maintain |
| • |
Not
labor intensive |
| • |
VOC
compliant |
| • |
Contains
no zinc,
no chromates,
no acids,
no heavy metals |
|
 |
 |
 |
Click Here For
International Orders
|
