Rust Bullet FAQ International Orders Rust Bullet Comparisons Tests with POR15® and Wasser® Brand System MSDS Data Engineering Data Rust Bullet Application Rust Bullet Home & Farm Uses Rust Bullet Commercial Uses Car Rust Prevention About Rust Bullet How Rust Bullet Works
Buy Rust Bullet

Rust Bullet Rust Inhibitor Email Rust Bullet
Rust Bullet Distributor
Download Rust Bullet Brochure
Crosshatch Adhesion Test

Method and Results
Method:

The next mechanical test performed was the rigorous Crosshatch Adhesion Test, ASTM D3359. This test involves cutting a grid of 100 squares into the coated panels. A pressure sensitive tape is applied over the grid, and then rapidly peeled away. The number of squares remaining on the panel gives a relative percentage value of adhesion. Original specimens of Wasser® Brand System (panel number 6), POR-15® System (panel number 8), and Rust Bullet® (panel number 2), were evaluated for adhesion in accordance with the procedure set forth in ASTM D3359.


(Play Video)

Results:

Rust Bullet® 100% adhesion
Wasser® Brand System 100% adhesion
POR-15® System 96% adhesion

 

 

Printed from National Testing Standards, Inc., Report:
“Test No. 8:

Method: Original specimens of panels 2, 6, and 8 were evaluated for adhesion in accordance with the procedure set forth in ASTM D-3359.
Results: Panels 2 and 6 exhibited 100% adhesion. Panel no. 8 exhibited 96% adhesion.”

(Report No.27935R2 National Testing Standards, Inc.)

All trademarks and copyrights are owned by their respective owners.

Please visit the National Testing Standards Website:
http://www.nationaltestingstandards.com/



Rust Bullet - Rust Bullet Application - About Rust Bullet
How Rust Bullet Works - Rust Bullet FAQ
POR15® and >Wasser® Brand System Comparison - MSDS Data
Corrosion Engineering Data - Home and Farm Uses
Commercial Uses - Car Rust Prevention - Rust Resources

Rust Bullet, LLC ©2002 - 2004 All rights reserved.