Preparing your floor properly is essential for achieving the best results with Rust Bullet Concrete Coatings. Here are the steps you should follow: 1. Clean the Surface Remove Debris: Sweep or vacuum the floor to remove dust, dirt, and loose debris. Degrease:...
Yes. Rust Bullet Concrete coatings are easy to apply and can be used by anyone from DIY consumers to professionals. This FAQ section is a great resource if you have any questions, and as with any project, it is a good idea to review the product Application Guidelines...
nRust Bullet Concrete coatings are ideal for most concrete surfaces. The concrete substrate must be structurally sound, thoroughly clean, and dry. Make sure the substrate is free of loose paint, moisture, dirt, mildew, oily substances, wax, loose particles, and other...
Yes, Rust Bullet Concrete coatings may be applied to unsealed concrete after the concrete has fully cured. If a fresh pour is done with the intent to coat with Rust Bullet, you want a rough or broom finish. Do not have the floor power troweled and do not use a sealer....
Rust Bullet Concrete coatings are moisture sensitive. Even the smallest amount of moisture on the surface can cause a coating failure. A moisture meter, calcium chloride test, or a plastic sheet test can be conducted to check for moisture. To perform the plastic sheet...
